Drop Test Simulation: Analyze Stress & Deformation without Breaking Your Device – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Exploring RAPID 2018 in Fort Worth, TX

Waking up at 3 A.M. isn’t something I like to do often. However, for this conference I was about to attend, it was worth the early rise! Caffeine is a must to get through a long day of walking around and being educated by all the different new and old manufacturers of 3D printers. If you have been around 3D printing, you know there are really two conferences that are above the rest; AMUG and RAPID. Here are some of the things that were announced that I believe are the most significant at RAPID.

Stratasys:

Stratasys didn’t disappoint this year in introducing a new carbon fiber 3D printer, material, and metal technology that will be coming in a year+. We are very familiar with the Nylon 12 Carbon Fiber reinforced material that Stratasys has. It is THE best Nylon 12 carbon fiber material on the market and there are a few factors as to why that is the case. One is that they are using longer strands of Carbon Fiber than the competitor along with 35% carbon fiber filled parts compared to 15%. Soluble support is huge for this material as well, along with 2 to 5 times faster printer speeds. Check out how One Wheel is using this printer to help with manufacturing their cool skateboard:

https://www.youtube.com/watch?v=tOojDgd7KVE

ANTERO 800 is the new material that Stratasys released recently. This material is being used in many amazing ways. Lockheed Martin/NASA/Stratasys/PADT collaborated in a very successful task to get flight approved hardware for one of the next missions to space. Below is the full story on this new and exciting ESD version of Antero 800 FDM material. Could your company also benefit from using this type of material? We would like to help!

http://www.3ders.org/articles/20180418-lockheed-martin-padt-stratasys-to-3d-print-over-100-parts-for-nasas-orion-capsule.html

Vero Magenta V and Vero Yellow V are the new Polyjet materials to help with getting more vibrant colors along with deeper red and brighter yellow. 500,000 color combinations can be achieved now with these 2 materials that have been improved upon. Absolutely beautiful parts can be made with a Stratasys J750 or J735.

Metal We have been asking (and have been asked) for metal for the longest time! When is Stratasys going to jump into the metal game? One of the main reasons why I went to RAPID this year was to see Stratasys Metal parts. They did not disappoint. As far as what density these metal parts are, the process for printing, and when a machine will be available, that is still the big unknown. One thing mentioned at the conference is that they are wanting to make metal 3D printing affordable to all with the ability to 3D print metal 80% cheaper than anything available right now. How this compares to what Desktop Metal, Mark Forged, HP, and others who proclaim to make metal parts cheaper than the Laser or Electron Beam options is yet to be known. Stratasys wants to be able to provide value to the metal market by focusing on areas that are lacking, which is Aluminum. Always good to have competition against the large companies of metal as it makes everyone get better at what they are doing. Read more about this machine and what Phil Reeves (VP of Strategic Consulting from Stratasys) has to say in an exclusive interview with TCT. Also below are a few pictures I took in the Stratasys booth of their metal parts that were on display.

www.tctmagazine.com/tct-events/3d-printing-at-rapid-tct/stratasys-metal-3d-printing/

 

 

 

 

 

 

Software was featured big time at RAPID because it unlocks the ability to 3D print amazing parts like this that was featured in the EOS booth. Lattice structures and topology optimized parts!

There were a lot of companies present at RAPID that highlighted where the industry is headed. Materials with vibrant color capabilities was one such area receiving a lot of attention. While competitors have introduced machines that are capable of printing in a wide variety of colors, they still fall short when compared to the Stratasys Polyjet offerings. Machines such as the J750 and J735 both offer a similar range of color compared to other companies on the market, but surpass them when it comes to material options, applications, and overall usability.

I enjoyed talking with all the major 3D printer manufactures at RAPID. One questions I would ask each of them is, what makes your system better than the competitors? I loved hearing the sales pitch about their machines and there was some great insight gained by asking this.At the end of the day, it all comes down to how you are wanting to use the 3D printer. At PADT we have many different 3D printers, and while we see and understand the appeal of the various different offerings on the market today, there is a reason why we continue to resell and support the brands we do. Let us know how we can help you out and any questions that you have with 3D printing.

Simulate Moving Parts Faster & Easier with Overset Mesh – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

What’s New & Exciting in Mechanical Simulation – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

The ANSYS Discovery Product Family in R19 – Webinar Recording

If you have any other questions, feel free to contact us at sales@padtinc.com or contact PADT’s Simulation Support Manager Ted Harris at Ted.Harris@padtinc.com.

Forbes.com: Finding True Innovators Is Tough, But The Talent Pool Is There

We have learned the hard way that “Finding True Innovators Is Tough, But the Talent Pool Is There.” And that pool is in the much-maligned millennial generation. In this contributions to Forbes.com, in their Grad of LifeVoice section, I explore what we have learned about that pool and offer up four suggestions:
1. Look for proactive behavior
2. Seek and encourage diversity in your workforce
3. Ask for a creative leam, then encourage more
4. Reward people who challenge your thinking and make you uncomfortable

Exploring the Value of Multi-Print 3D Models for Medical with Stratasys & Intermountain Healthcare

PADT’s Salt Lake City office has been involved with fulfillment of medical 3d Printing of several cases where customers are exploring the value of multi-color and multi-material medical 3D models by using the Stratasys J750 or the Connex 3. One of those cases was presented at the Mayo Clinic’s Collaborative 3D Printing in Medical Practice 2018 course, which was held in Arizona this year.

An Intermountain Healthcare facility in Salt Lake City needed help with 3D printing a patient-specific anatomy, as they were looking to better their understanding of the value of 3D printing using multi-color printer beyond their existing in-house capabilities. In the picture below, Rami Shorti, PhD., a senior Biomechanical Engineering Scientist at Intermountain Healthcare, wrote:

“A patient with a horseshoe kidney and multiple large symptomatic stones, who had failed Extracorporeal Shock Wave Lithotripsy and Ureteroscopy Treatment, was used to evaluate the benefit of using different imaging modalities intraoperatively.” 

Working with us in Salt Lake City, Rami Shorti, PhD, prepared the patient-specific medical imaging segmentation, post-processing of the patient anatomy, and finally generated for us a 3D printable CAD model that we were able to print using a Stratasys Objet 260 Connex 3. Since our office is located just around the corner from the hospital, we were able to work closely with Rami to identify the colors and finish of the final part.

The Connex 3 printer was introduced in 2014 as the only printer in the world that could combine three different model materials in a single print pass. Most 3D printers can only print with one material at a time, which is one of the main reasons why this technology is preferred for medical use cases along with its added precision. In 2017, Stratasys introduced the J750, which again is an industry first, becoming the only printer in the world that can print 6 different materials at the same time.  Combinations of hard plastics and rubber materials allow for a range of shore hardness values along with the ability to mix three primary colors to print 500,000 different colors.

With a quick turnaround needed, we decided to use the Connex 3 and were amazed that we were able to print the parts in two batches. Within 48 hours of receiving the STL files from Dr. Shorti, we were able to 3D print, post-process, and deliver the parts in time for the surgeon to review the time-sensitive surgical planning guides using the mockup. To enhance the transparency of the parts, we simply applied a few coats of Rust-Oleum Clear Gloss to the 3D printed part.  Now we were able to relax and wait for it to dry.  Below is a picture of the finished products displayed at the Mayo Clinic event.

 “3D printing added a level of benefit because of its ability to showcase the stones, renal pelvis, and renal arteries and veins simultaneously through the image fusion step done in Mimics software and with the use of specific materials and contrasting colors.  In addition, its ability to be held and manipulated in space was observed to be beneficial especially for patient education.”

– Rami Shorti, PhD., senior Biomechanical Engineering Scientist, Intermountain Healthcare

PADT is excited to continue our work with Intermountain Healthcare, and grow this relationship as new opportunities arise to leverage multi-material printing.

From Ideation to Operation: The ANSYS Discovery Product Family in R19 – Webinar

Don’t miss this informative presentation – Secure your spot today!

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

ANSYS Discovery Live – Thermal Conduction Webinar Recording

If you have any other questions, feel free to contact us at sales@padtinc.com or contact PADT’s Lead Application Engineer Manoj Mahendran at manoj.mahendran@padtinc.com.

Discover the strength of structural and modal analysis in ANSYS Discovery Live – Webinar

 

Join PADT’s Simulation Support Application Engineer Doug Oatis, for a free webinar including an exploration of the static structural and modal capabilities available within ANSYS Discovery Live, followed by a live demo of the tool as it relates to both application areas.

Don’t miss this informative presentation – Secure your spot today!
If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 015 – Using Nimbix to Realize HPC in the Cloud & ANSYS Discovery Live for Transient Thermal Conduction

 

Published on: February 26, 2018
With: Manoj Mahendran, Tom Chadwick, Ted Harris, Adil Noor, Eric Miller
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Tom Chadwick, Ted Harris, Manoj Mahendran, and Special Guest Adil Noor from Nimbix, for a discussion on the transient thermal conduction capabilities available within ANSYS Discovery Live, along with an in depth look at how to use Nimbix to realize high performance computing in the cloud.
Listen:
Subscribe:

@ANSYS #ANSYS

Explore the thermal capabilities available in Discovery Live – Webinar

 

This free webinar will cover:

  • The basic functionality of Discovery Live
  • Applications specific to Thermal Conduction
  • A live demo of the thermal capabilities available in Discovery Live

Don’t miss this informative presentation – Secure your spot today!

Can’t make it? Register anyway, as a recording will be made available for on demand viewing.

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

ANSYS Discovery Live – Fluid Flows Webinar Recording & FAQ

Below you can find some of the most frequently asked questions from this webinar, along with our answers.

Q: What computer and license type are you actually using for running the simulation? Ram, cores, CPU, etc.

A: 16 GB RAM Intel i7, NVIDIA Quadro K1100M

Q: Is the solver running a transient solution in the background while you are post processing and haven’t paused it, or is it marching towards better convergence of a steady state solution?

A: The solver is running a transient solution the entire time. The only time it is not doing this is if I pause the simulation.

Q: Does this require 3D models to be built within Discovery Live, or it can import outside 3D models (Solidworks etc) and still allows the user to add/modify geometry objects on the fly within Discovery Live?

A: Yes, you can import any CAD native format or neutral format in Discovery Live. You can also create Geometry from scratch in Discovery Live using the SpaceClaim tools.

Q: It looks like when you change the “speed – fidelity” setting, the solver resets; while when you change other settings (like domain geometry), the solution continues from last step. What’s being changed when you change the “speed-fidelity” setting?

A: When you change the Speed-Fidelity setting, the computational grid of the domain is coarsened or refined. It is also re-partitioned/parallelized on the GPU cores.

Q: Are there predictive features of simulation, obtaining design suggestions from the end results? Are there inputs for end results to accomplish reverse engineering?

A: Yes, in a sense. Because Discovery Live provides literally “real-time” feedback on design changes, you have design suggestions based on the end results. For reverse engineering in Discovery Live: there are not inputs for end results, but the part you’d like to reverse engineer can be imported (or created) in Discovery Live, and then analyzed in the range of operating conditions to understand it’s performance.

Q: Do you have any control of the mesh? How boundary/layer effects can be checked?

A: Control of the mesh available via the Speed-Fidelity slider bar. Boundary layer effects could be checked using surface integrals of force, but again recall that if you’re trying to finely resolve details such as boundary layer physics, you may need to consider the next level of accuracy which would be Discovery AIM or Fluent.

If you have any other questions, feel free to contact us at sales@padtinc.com or contact PADT’s CFD Team Lead Application Engineer Clinton Smith at clinton.smith@padtinc.com.

All Things ANSYS 014 – Fluid Flows with ANSYS Discovery Live & the ANSYS Startup Program

 

Published on: February 26, 2018
With: Joe Woodword, Tom Chadwick, Ted Harris, Clinton Smith, Eric Miller
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Joe Woodword, Tom Chadwick, Clinton Smith, and Ted Harris, for a discussion on the internal and external fluid flow capabilities available in ANSYS Discovery Live. This episode also features a very special interview with ANSYS’ own Paul Lethbridge, Senior Manager of the Academic and Startup Programs, recorded live at Phoenix Startup Week.
Listen:
Subscribe:

 

Introducing the ANSYS Discovery Marketplace

PADT is excited to introduce the latest innovation in ANSYS simulation tools, The ANSYS Discovery Marketplace.

Thanks to developments made by ANSYS Inc, world class simulation software is now available right at your fingertips. This platform drastically speeds up and simplifies the purchasing process while providing you with all of the information you need to ensure that you make the right choice and select the software that works best for you.

The offerings are divided into three bundles: Essentials, Standard, and Ultimate.

  

Each of these includes a different group of tools and capabilities, taken from the new ANSYS Discovery family of products, which includes Discovery Live, Discovery Space Claim, and Discovery AIM.

Interested in purchasing today or just learning more about these great offerings?

Click the link below to visit our marketplace: