This is an unusual HOW-TO post for our blog. Most of the time, we post useful technical content about Ansys, Flownex, 3D Printing, Scanning, and product development. But I’ve been on a no-code kick using Microsoft Power Automate and the flows you can create there. But as I’ve learned the tool, I’ve found a lack […]
At PADT, “We Make Innovation Work.” But what does that really mean? We provide the tools and services that engineers need to design, test, and manufacture physical products. The list of services and products is long, because doing product development is complicated and requires many skills and resources. So in the end the biggest problem […]
March starts out with a bang, with a ton of events in that very first week. So we are updating everyone on the month’s events a week early. They cover a wide range of customers and states, so we hope to see many of you there. The most important is our Open House for families, […]
Welcome to November, when things start getting really busy with end of year events. We have a lot going on with celebrations and seminars. Take a look and we hope to see you this month! November 6-10: Las Vegas, NV ANS Winter Meeting & Expo PADT’s Flownex team will be at the winter meeting with […]
The year is almost halfway over and the pace of events that PADT is attending and holding is slackening a bit as we account for summer vacation and, in Phoenix, the blistering heat. Take a look below to see what we have planned, mostly webinars, and review what happened in a fun filled May below. […]
April was a busy month, but May looks a bit more normal. We hope to see some of you at the following PADT events happening in the next 5 or 6 week. You can also get a summary of what happened in April below. May 11: Internet of Things World Santa Clara, CA A couple of us are […]
This is the first of what we hope to be a monthly posting here on our blog, reviewing PADT events happening in the next 5 or 6 weeks and reviewing activities over the previous month. Upcoming Events, Seminars, and Gatherings April 5-7: AMUG Annual Meeting St. Luis, MO This annual meeting of the Additive Manufacturing […]
Sometimes you get that prefect storm where everything happens at once, and these last weeks of May and first weeks of June are shaping up to be our busiest time for conferences and shows this year. We are going to be all over the place: Newfoundland, Montreal, Long Beach, Houston, and even Phoenix. So I […]
PADT currently has three job openings, two sales and one engineering. If you are interested, or know of someone that is, please use the links below to learn more. If you are smart, proactive, love technology, and believe in win-win interactions with customers, then PADT might be the place for you. Electrical Engineer, High-Frequency Simulation: RF/Antenna […]
Since this years NAFEMS Americas conference is in PADT’s back yard in Colorado Springs, Colorado, we obtained a booth this year. Our Colorado simulation team will be there to talk about all things ANSYS, CUBE Simulation Computers, and Flownex. If you are gong to be there, stop on by and say hello. We will be in […]
Another year is winding down to a close and PADT’s Arizona staff gathered in Chandler for our annual holiday party. It is always nice to step outside of the cubical and talk with co-worker’s spouses, employees you don’t get to talk with at work, and even with the people you do spend all day with, […]
The PADT and Flownex teams have our booth set up and ready to go for the next three days at Turbo Expo 2013. This is always one of our favorite events because most of us came from this industry, and in fact all four of the founders were turbine-engine-engineers before we started PADT. A special […]
It’s been a busy couple of weeks for PADT, jetting around the four-corner region for technical conferences. Three in fact. The first was the 2013 Society for Mining, Metallurgy & Exploration Annual Meeting & Exhibit in Denver, Colorado. We were focusing on simulation for this event, with Flownex and ANSYS. We were not however, focusing our […]
After working with the mining industry in Arizona for years, we have finally gotten around to joining the two professional groups that work with the industry: Arizona Mining & Industry Get our Support, better known as AMIGOS, and the Arizona Mining Association. We are excited about being able to contribute more to the Arizona mining community through […]
Here we are again. At the end of another year. It has been a big year for The Focus, PADT, and for ANSYS in general. It is our last full week of work for 2012 here at PADT so we always like to finish up the year with a summary article, looking back and looking […]